Rapier:Equipment standards - Spears - Spear heads: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

25 November 2025

  • curprev 08:1008:10, 25 November 2025 AngeleDeSavigny talk contribs 876 bytes +876 Created page with "==Spear heads== # The spear head must be made of flexible rubber. # The head must be at least 6 inches (150 mm) long and have maximum length of 20 inches (510 mm). # The rubber at the tip must be at least 1/4 inch (6 mm) thick. # The spear head must flex to 90 degrees with hand pressure, and must substantially return to its original shape within 3 seconds. # The flexible tip must extend at least 4 inches past the end of the of the rigid haft. # The head must be fricti..."
Retrieved from "http://society-rules.fullmesh.co.nz/index.php/Rapier:Equipment_standards_-_Spears_-_Spear_heads"